code/__DEFINES/atmospherics.dm
| R_IDEAL_GAS_EQUATION | kPaL/(Kmol) |
|---|---|
| ONE_ATMOSPHERE | kPa |
| TCMB | -270.3degC |
| TCRYO | -48.15degC |
| T0C | 0degC |
| T20C | 20degC |
| MOLES_CELLSTANDARD | moles in a 2.5 m^3 cell at 101.325 Pa and 20 degC |
| M_CELL_WITH_RATIO | compared against for superconductivity |
| O2STANDARD | percentage of oxygen in a normal mixture of air |
| N2STANDARD | same but for nitrogen |
| MOLES_O2STANDARD | O2 standard value (21%) |
| MOLES_N2STANDARD | N2 standard value (79%) |
| CELL_VOLUME | liters in a cell |
| BREATH_VOLUME | liters in a normal breath |
| BREATH_PERCENTAGE | Amount of air to take a from a tile |
| EXCITED_GROUP_BREAKDOWN_CYCLES | number of FULL air controller ticks before an excited group breaks down (averages gas contents across turfs) |
| EXCITED_GROUP_DISMANTLE_CYCLES | number of FULL air controller ticks before an excited group dismantles and removes its turfs from active |
| MINIMUM_AIR_RATIO_TO_SUSPEND | Ratio of air that must move to/from a tile to reset group processing |
| MINIMUM_AIR_RATIO_TO_MOVE | Minimum ratio of air that must move to/from a tile |
| MINIMUM_AIR_TO_SUSPEND | Minimum amount of air that has to move before a group processing can be suspended |
| MINIMUM_MOLES_DELTA_TO_MOVE | Either this must be active |
| MINIMUM_TEMPERATURE_TO_MOVE | or this (or both, obviously) |
| MINIMUM_TEMPERATURE_DELTA_TO_SUSPEND | Minimum temperature difference before group processing is suspended |
| MINIMUM_TEMPERATURE_DELTA_TO_CONSIDER | Minimum temperature difference before the gas temperatures are just set to be equal |
| WINDOW_HEAT_TRANSFER_COEFFICIENT | a hack for now |
| HEAT_CAPACITY_VACUUM | a hack to help make vacuums "cold", sacrificing realism for gameplay |
| MOLES_GAS_VISIBLE | Moles in a standard cell after which gases are visible |
| FACTOR_GAS_VISIBLE_MAX | moles_visible * FACTOR_GAS_VISIBLE_MAX = Moles after which gas is at maximum visibility |
| MOLES_GAS_VISIBLE_STEP | Mole step for alpha updates. This means alpha can update at 0.25, 0.5, 0.75 and so on |
| NO_REACTION | The gas mixture is not reacting |
| REACTING | The gas mixture is reacting |
| STOP_REACTIONS | The gas mixture is able to stop all reactions |
| FUSION_INSTABILITY_ENDOTHERMALITY_HFR | Maximum instability before the reaction goes endothermic |
| FUSION_MAXIMUM_TEMPERATURE | Maximum reachable fusion temperature |
| HAZARD_HIGH_PRESSURE | This determins at what pressure the ultra-high pressure red icon is displayed. (This one is set as a constant) |
| WARNING_HIGH_PRESSURE | This determins when the orange pressure icon is displayed (it is 0.7 * HAZARD_HIGH_PRESSURE) |
| WARNING_LOW_PRESSURE | This is when the gray low pressure icon is displayed. (it is 2.5 * HAZARD_LOW_PRESSURE) |
| HAZARD_LOW_PRESSURE | This is when the black ultra-low pressure icon is displayed. (This one is set as a constant) |
| TEMPERATURE_DAMAGE_COEFFICIENT | This is used in handle_temperature_damage() for humans, and in reagents that affect body temperature. Temperature damage is multiplied by this amount. |
| BODYTEMP_NORMAL | The natural temperature for a body |
| BODYTEMP_AUTORECOVERY_DIVISOR | This is the divisor which handles how much of the temperature difference between the current body temperature and 310.15K (optimal temperature) humans auto-regenerate each tick. The higher the number, the slower the recovery. This is applied each tick, so long as the mob is alive. |
| BODYTEMP_AUTORECOVERY_MINIMUM | Minimum amount of kelvin moved toward 310K per tick. So long as abs(310.15 - bodytemp) is more than 50. |
| BODYTEMP_COLD_DIVISOR | Similar to the BODYTEMP_AUTORECOVERY_DIVISOR, but this is the divisor which is applied at the stage that follows autorecovery. This is the divisor which comes into play when the human's loc temperature is lower than their body temperature. Make it lower to lose bodytemp faster. |
| BODYTEMP_HEAT_DIVISOR | Similar to the BODYTEMP_AUTORECOVERY_DIVISOR, but this is the divisor which is applied at the stage that follows autorecovery. This is the divisor which comes into play when the human's loc temperature is higher than their body temperature. Make it lower to gain bodytemp faster. |
| BODYTEMP_COOLING_MAX | The maximum number of degrees that your body can cool in 1 tick, due to the environment, when in a cold area. |
| BODYTEMP_HEATING_MAX | The maximum number of degrees that your body can heat up in 1 tick, due to the environment, when in a hot area. |
| BODYTEMP_HEAT_DAMAGE_LIMIT | The limit the human body can take before it starts taking damage from heat. |
| BODYTEMP_COLD_DAMAGE_LIMIT | The limit the human body can take before it starts taking damage from coldness. |
| SPACE_HELM_MIN_TEMP_PROTECT | what min_cold_protection_temperature is set to for space-helmet quality headwear. MUST NOT BE 0. |
| SPACE_HELM_MAX_TEMP_PROTECT | Thermal insulation works both ways /Malkevin |
| SPACE_SUIT_MIN_TEMP_PROTECT | what min_cold_protection_temperature is set to for space-suit quality jumpsuits or suits. MUST NOT BE 0. |
| FIRE_SUIT_MIN_TEMP_PROTECT | Cold protection for firesuits |
| FIRE_SUIT_MAX_TEMP_PROTECT | what max_heat_protection_temperature is set to for firesuit quality suits. MUST NOT BE 0. |
| FIRE_HELM_MIN_TEMP_PROTECT | Cold protection for fire helmets |
| FIRE_HELM_MAX_TEMP_PROTECT | for fire helmet quality items (red and white hardhats) |
| FIRE_IMMUNITY_MAX_TEMP_PROTECT | what max_heat_protection_temperature is set to for firesuit quality suits and helmets. MUST NOT BE 0. |
| HELMET_MIN_TEMP_PROTECT | For normal helmets |
| HELMET_MAX_TEMP_PROTECT | For normal helmets |
| ARMOR_MIN_TEMP_PROTECT | For armor |
| ARMOR_MAX_TEMP_PROTECT | For armor |
| GLOVES_MIN_TEMP_PROTECT | For some gloves (black and) |
| GLOVES_MAX_TEMP_PROTECT | For some gloves |
| SHOES_MIN_TEMP_PROTECT | For gloves |
| SHOES_MAX_TEMP_PROTECT | For gloves |
| PRESSURE_DAMAGE_COEFFICIENT | The amount of pressure damage someone takes is equal to (pressure / HAZARD_HIGH_PRESSURE)*PRESSURE_DAMAGE_COEFFICIENT, with the maximum of MAX_PRESSURE_DAMAGE |
| LOW_PRESSURE_DAMAGE | The amount of damage someone takes when in a low pressure area (The pressure threshold is so low that it doesn't make sense to do any calculations, so it just applies this flat value). |
| COLD_SLOWDOWN_FACTOR | Humans are slowed by the difference between bodytemp and BODYTEMP_COLD_DAMAGE_LIMIT divided by this, bigger numbers mean faster, smaller means slower |
| MAX_OUTPUT_PRESSURE | (kPa) What pressure pumps and powered equipment max out at. |
| MAX_TRANSFER_RATE | (L/s) Maximum speed powered equipment can work at. |
| VOLUME_PUMP_LEAK_AMOUNT | How many percent of the contents that an overclocked volume pumps leak into the air |
| TANK_MELT_TEMPERATURE | temperature in kelvins at which a tank will start to melt |
| TANK_LEAK_PRESSURE | Tank starts leaking |
| TANK_RUPTURE_PRESSURE | Tank spills all contents into atmosphere |
| TANK_FRAGMENT_PRESSURE | Boom 3x3 base explosion |
| TANK_FRAGMENT_SCALE | +1 for each SCALE kPa aboe threshold |
| ATMOS_PASS_PROC | ask can_atmos_pass() |
| ATMOS_PASS_DENSITY | just check density |
| NORMAL_TURF | Normal non-active turf |
| MAKE_ACTIVE | Set the turf to be activated on the next calculation |
| KILL_EXCITED | Disable excited group |
| TURF_TEMPERATURE | Used to define the temperature of a tile, arg is the temperature it should be at. Should always be put at the end of the atmos list. This is solely to be used after compile-time. |
| OPENTURF_DEFAULT_ATMOS | the default air mix that open turfs spawn |
| TCOMMS_ATMOS | -193,15°C telecommunications. also used for xenobiology slime killrooms |
| AIRLESS_ATMOS | space |
| FROZEN_ATMOS | -93.15°C snow and ice turfs |
| KITCHEN_COLDROOM_ATMOS | -80°C kitchen coldroom; higher amount of mol to reach about 101.3 kpA |
| BURNMIX_ATMOS | used in the holodeck burn test program |
| BURNING_COLD | -153.15°C plasma air, used for burning people. |
| LAVALAND_EQUIPMENT_EFFECT_PRESSURE | what pressure you have to be under to increase the effect of equipment meant for lavaland |
| PIPING_ALL_LAYER | intended to connect with all layers, check for all instead of just one. |
| PIPING_ONE_PER_TURF | can only be built if nothing else with this flag is on the tile already. |
| PIPING_DEFAULT_LAYER_ONLY | can only exist at PIPING_LAYER_DEFAULT |
| PIPING_CARDINAL_AUTONORMALIZE | north/south east/west doesn't matter, auto normalize on build. |
| VENTCRAWL_ALLOWED | Allows for ventcrawling to occur. All atmospheric machines have this flag on by default. Cryo is the exception |
| VENTCRAWL_ENTRANCE_ALLOWED | Allows mobs to enter or leave from atmospheric machines. On for passive, unary, and scrubber vents. |
| VENTCRAWL_CAN_SEE | Used to check if a machinery is visible. Called by update_pipe_vision(). On by default for all except cryo. |
| PIPING_LAYER_SHIFT | Moves the icon of the device based on the piping layer and on the direction |
| PIPING_FORWARD_SHIFT | Moves the icon of the device based on the piping layer and on the direction, the shift amount is dictated by more_shift |
| PIPING_LAYER_DOUBLE_SHIFT | Moves the icon of the device based on the piping layer on both x and y |
Define Details
AIRLESS_ATMOS
space
ARMOR_MAX_TEMP_PROTECT
For armor
ARMOR_MIN_TEMP_PROTECT
For armor
ATMOS_PASS_DENSITY
just check density
ATMOS_PASS_PROC
ask can_atmos_pass()
BODYTEMP_AUTORECOVERY_DIVISOR
This is the divisor which handles how much of the temperature difference between the current body temperature and 310.15K (optimal temperature) humans auto-regenerate each tick. The higher the number, the slower the recovery. This is applied each tick, so long as the mob is alive.
BODYTEMP_AUTORECOVERY_MINIMUM
Minimum amount of kelvin moved toward 310K per tick. So long as abs(310.15 - bodytemp) is more than 50.
BODYTEMP_COLD_DAMAGE_LIMIT
The limit the human body can take before it starts taking damage from coldness.
BODYTEMP_COLD_DIVISOR
Similar to the BODYTEMP_AUTORECOVERY_DIVISOR, but this is the divisor which is applied at the stage that follows autorecovery. This is the divisor which comes into play when the human's loc temperature is lower than their body temperature. Make it lower to lose bodytemp faster.
BODYTEMP_COOLING_MAX
The maximum number of degrees that your body can cool in 1 tick, due to the environment, when in a cold area.
BODYTEMP_HEATING_MAX
The maximum number of degrees that your body can heat up in 1 tick, due to the environment, when in a hot area.
BODYTEMP_HEAT_DAMAGE_LIMIT
The limit the human body can take before it starts taking damage from heat.
BODYTEMP_HEAT_DIVISOR
Similar to the BODYTEMP_AUTORECOVERY_DIVISOR, but this is the divisor which is applied at the stage that follows autorecovery. This is the divisor which comes into play when the human's loc temperature is higher than their body temperature. Make it lower to gain bodytemp faster.
BODYTEMP_NORMAL
The natural temperature for a body
BREATH_PERCENTAGE
Amount of air to take a from a tile
BREATH_VOLUME
liters in a normal breath
BURNING_COLD
-153.15°C plasma air, used for burning people.
BURNMIX_ATMOS
used in the holodeck burn test program
CELL_VOLUME
liters in a cell
COLD_SLOWDOWN_FACTOR
Humans are slowed by the difference between bodytemp and BODYTEMP_COLD_DAMAGE_LIMIT divided by this, bigger numbers mean faster, smaller means slower
EXCITED_GROUP_BREAKDOWN_CYCLES
number of FULL air controller ticks before an excited group breaks down (averages gas contents across turfs)
EXCITED_GROUP_DISMANTLE_CYCLES
number of FULL air controller ticks before an excited group dismantles and removes its turfs from active
FACTOR_GAS_VISIBLE_MAX
moles_visible * FACTOR_GAS_VISIBLE_MAX = Moles after which gas is at maximum visibility
FIRE_HELM_MAX_TEMP_PROTECT
for fire helmet quality items (red and white hardhats)
FIRE_HELM_MIN_TEMP_PROTECT
Cold protection for fire helmets
FIRE_IMMUNITY_MAX_TEMP_PROTECT
what max_heat_protection_temperature is set to for firesuit quality suits and helmets. MUST NOT BE 0.
FIRE_SUIT_MAX_TEMP_PROTECT
what max_heat_protection_temperature is set to for firesuit quality suits. MUST NOT BE 0.
FIRE_SUIT_MIN_TEMP_PROTECT
Cold protection for firesuits
FROZEN_ATMOS
-93.15°C snow and ice turfs
FUSION_INSTABILITY_ENDOTHERMALITY_HFR
Maximum instability before the reaction goes endothermic
FUSION_MAXIMUM_TEMPERATURE
Maximum reachable fusion temperature
GLOVES_MAX_TEMP_PROTECT
For some gloves
GLOVES_MIN_TEMP_PROTECT
For some gloves (black and)
HAZARD_HIGH_PRESSURE
This determins at what pressure the ultra-high pressure red icon is displayed. (This one is set as a constant)
HAZARD_LOW_PRESSURE
This is when the black ultra-low pressure icon is displayed. (This one is set as a constant)
HEAT_CAPACITY_VACUUM
a hack to help make vacuums "cold", sacrificing realism for gameplay
HELMET_MAX_TEMP_PROTECT
For normal helmets
HELMET_MIN_TEMP_PROTECT
For normal helmets
KILL_EXCITED
Disable excited group
KITCHEN_COLDROOM_ATMOS
-80°C kitchen coldroom; higher amount of mol to reach about 101.3 kpA
LAVALAND_EQUIPMENT_EFFECT_PRESSURE
what pressure you have to be under to increase the effect of equipment meant for lavaland
LOW_PRESSURE_DAMAGE
The amount of damage someone takes when in a low pressure area (The pressure threshold is so low that it doesn't make sense to do any calculations, so it just applies this flat value).
MAKE_ACTIVE
Set the turf to be activated on the next calculation
MAX_OUTPUT_PRESSURE
(kPa) What pressure pumps and powered equipment max out at.
MAX_TRANSFER_RATE
(L/s) Maximum speed powered equipment can work at.
MINIMUM_AIR_RATIO_TO_MOVE
Minimum ratio of air that must move to/from a tile
MINIMUM_AIR_RATIO_TO_SUSPEND
Ratio of air that must move to/from a tile to reset group processing
MINIMUM_AIR_TO_SUSPEND
Minimum amount of air that has to move before a group processing can be suspended
MINIMUM_MOLES_DELTA_TO_MOVE
Either this must be active
MINIMUM_TEMPERATURE_DELTA_TO_CONSIDER
Minimum temperature difference before the gas temperatures are just set to be equal
MINIMUM_TEMPERATURE_DELTA_TO_SUSPEND
Minimum temperature difference before group processing is suspended
MINIMUM_TEMPERATURE_TO_MOVE
or this (or both, obviously)
MOLES_CELLSTANDARD
moles in a 2.5 m^3 cell at 101.325 Pa and 20 degC
MOLES_GAS_VISIBLE
Moles in a standard cell after which gases are visible
MOLES_GAS_VISIBLE_STEP
Mole step for alpha updates. This means alpha can update at 0.25, 0.5, 0.75 and so on
MOLES_N2STANDARD
N2 standard value (79%)
MOLES_O2STANDARD
O2 standard value (21%)
M_CELL_WITH_RATIO
compared against for superconductivity
N2STANDARD
same but for nitrogen
NORMAL_TURF
Normal non-active turf
NO_REACTION
The gas mixture is not reacting
O2STANDARD
percentage of oxygen in a normal mixture of air
ONE_ATMOSPHERE
kPa
OPENTURF_DEFAULT_ATMOS
the default air mix that open turfs spawn
PIPING_ALL_LAYER
intended to connect with all layers, check for all instead of just one.
PIPING_CARDINAL_AUTONORMALIZE
north/south east/west doesn't matter, auto normalize on build.
PIPING_DEFAULT_LAYER_ONLY
can only exist at PIPING_LAYER_DEFAULT
PIPING_FORWARD_SHIFT
Moves the icon of the device based on the piping layer and on the direction, the shift amount is dictated by more_shift
PIPING_LAYER_DOUBLE_SHIFT
Moves the icon of the device based on the piping layer on both x and y
PIPING_LAYER_SHIFT
Moves the icon of the device based on the piping layer and on the direction
PIPING_ONE_PER_TURF
can only be built if nothing else with this flag is on the tile already.
PRESSURE_DAMAGE_COEFFICIENT
The amount of pressure damage someone takes is equal to (pressure / HAZARD_HIGH_PRESSURE)*PRESSURE_DAMAGE_COEFFICIENT, with the maximum of MAX_PRESSURE_DAMAGE
REACTING
The gas mixture is reacting
R_IDEAL_GAS_EQUATION
kPaL/(Kmol)
SHOES_MAX_TEMP_PROTECT
For gloves
SHOES_MIN_TEMP_PROTECT
For gloves
SPACE_HELM_MAX_TEMP_PROTECT
Thermal insulation works both ways /Malkevin
SPACE_HELM_MIN_TEMP_PROTECT
what min_cold_protection_temperature is set to for space-helmet quality headwear. MUST NOT BE 0.
SPACE_SUIT_MIN_TEMP_PROTECT
what min_cold_protection_temperature is set to for space-suit quality jumpsuits or suits. MUST NOT BE 0.
STOP_REACTIONS
The gas mixture is able to stop all reactions
T0C
0degC
T20C
20degC
TANK_FRAGMENT_PRESSURE
Boom 3x3 base explosion
TANK_FRAGMENT_SCALE
+1 for each SCALE kPa aboe threshold
TANK_LEAK_PRESSURE
Tank starts leaking
TANK_MELT_TEMPERATURE
temperature in kelvins at which a tank will start to melt
TANK_RUPTURE_PRESSURE
Tank spills all contents into atmosphere
TCMB
-270.3degC
TCOMMS_ATMOS
-193,15°C telecommunications. also used for xenobiology slime killrooms
TCRYO
-48.15degC
TEMPERATURE_DAMAGE_COEFFICIENT
This is used in handle_temperature_damage() for humans, and in reagents that affect body temperature. Temperature damage is multiplied by this amount.
TURF_TEMPERATURE
Used to define the temperature of a tile, arg is the temperature it should be at. Should always be put at the end of the atmos list. This is solely to be used after compile-time.
VENTCRAWL_ALLOWED
Allows for ventcrawling to occur. All atmospheric machines have this flag on by default. Cryo is the exception
VENTCRAWL_CAN_SEE
Used to check if a machinery is visible. Called by update_pipe_vision(). On by default for all except cryo.
VENTCRAWL_ENTRANCE_ALLOWED
Allows mobs to enter or leave from atmospheric machines. On for passive, unary, and scrubber vents.
VOLUME_PUMP_LEAK_AMOUNT
How many percent of the contents that an overclocked volume pumps leak into the air
WARNING_HIGH_PRESSURE
This determins when the orange pressure icon is displayed (it is 0.7 * HAZARD_HIGH_PRESSURE)
WARNING_LOW_PRESSURE
This is when the gray low pressure icon is displayed. (it is 2.5 * HAZARD_LOW_PRESSURE)
WINDOW_HEAT_TRANSFER_COEFFICIENT
a hack for now