mecha_part_fabricator

Vars
authorization_override	Controls whether or not the more dangerous designs have been unlocked by a head's id manually, rather than alert level unlocks
being_built	The current design datum that the machine is building.
build_finish	World time when the build will finish.
build_materials	Reference to all materials used in the creation of the item being_built.
build_start	World time when the build started.
component_coeff	Coefficient for the efficiency of material usage in item building. Based on the installed parts.
hacked	Whether the access is hacked or not
id_card	ID card of the person using the machine for the purpose of tracking access
link_on_init	Whether the Exofab links to the ore silo on init. Special derelict or maintanance variants should set this to FALSE.
part_sets	A list of categories that valid MECHFAB design datums will broadly categorise themselves under.
process_queue	Whether or not the machine is building the entire queue automagically.
queue	Current items in the build queue.
rmat	Reference to a remote material inventory, such as an ore silo.
seconds_electrified	World ticks the machine is electified for
stored_part	Part currently stored in the Exofab.
stored_research	Reference to the techweb.
time_coeff	Coefficient for the speed of item building. Based on the installed parts.
Procs
_try_interact	All the negative wire effects Break wire breaks one limb (Because pain is to be had)
add_part_set_to_queue	Adds a list of datum designs to the build queue.
add_to_queue	Adds a datum design to the build queue.
build_next_in_queue	Attempts to build the next item in the build queue.
build_part	Starts the build process for a given design datum.
check_resources	Checks if the Exofab has enough resources to print a given item.
combat_parts_allowed	Updates the various authorization checks used to determine if combat parts are available to the current user
dispense_built_part	Dispenses a part to the tile infront of the Exosuit Fab.
eject_sheets	Eject material sheets.
get_construction_time_w_coeff	Calculates the coefficient-modified build time of a design.
get_resource_cost_w_coeff	Calculates the coefficient-modified resource cost of a single material component of a design's recipe.
get_resources_w_coeff	Calculates resource/material costs for printing an item based on the machine's resource coefficient.
head_or_silicon	made as a lazy check to allow silicons full access always
list_queue	Generates a list of parts formatted for tgui based on the current build queue.
on_finish_printing	Intended to be called when the exofab has stopped working and is no longer printing items.
on_start_printing	Intended to be called when an item starts printing.
output_available_resources	Generates a list of resources / materials available to this Exosuit Fab
output_part_info	Generates an info list for a given part.
remove_from_queue	Removes datum design from the build queue based on index.
reset	Picks limb to break. People with less limbs have a chance of it grapping at air
shock	Shock the passed in user

Var Details

var
authorization_override
–

Controls whether or not the more dangerous designs have been unlocked by a head's id manually, rather than alert level unlocks

var
being_built
– /datum/design

The current design datum that the machine is building.

var
build_finish
–

World time when the build will finish.

var
build_materials
– /list

Reference to all materials used in the creation of the item being_built.

var
build_start
–

World time when the build started.

var
component_coeff
–

Coefficient for the efficiency of material usage in item building. Based on the installed parts.

var
hacked
–

Whether the access is hacked or not

var
id_card
– /obj/item/card/id

ID card of the person using the machine for the purpose of tracking access

var
link_on_init
–

Whether the Exofab links to the ore silo on init. Special derelict or maintanance variants should set this to FALSE.

var
part_sets
– /list

A list of categories that valid MECHFAB design datums will broadly categorise themselves under.

var
process_queue
–

Whether or not the machine is building the entire queue automagically.

var
queue
– /list

Current items in the build queue.

var
rmat
– /datum/component/remote_materials

Reference to a remote material inventory, such as an ore silo.

var
seconds_electrified
–

World ticks the machine is electified for

var
stored_part
– /obj/item

Part currently stored in the Exofab.

var
stored_research
– /datum/techweb

Reference to the techweb.

var
time_coeff
–

Coefficient for the speed of item building. Based on the installed parts.

Proc Details

_try_interact
(/mob/user)

All the negative wire effects Break wire breaks one limb (Because pain is to be had)

proc
add_part_set_to_queue
(/list/part_list, /mob/user)

Adds a list of datum designs to the build queue.

Will only add designs that are in this machine's stored techweb. Does final checks for datum IDs and makes sure this machine can build the designs.

part_list - List of datum design ids for designs to add to the queue.

proc
add_to_queue
(/datum/design/D, /mob/user)

Adds a datum design to the build queue.

Returns TRUE if successful and FALSE if the design was not added to the queue.

D - Datum design to add to the queue.

proc
build_next_in_queue
(verbose)

Attempts to build the next item in the build queue.

Returns FALSE if either there are no more parts to build or the next part is not buildable. Returns TRUE if the next part has started building.

verbose - Whether the machine should use say() procs. Set to FALSE to disable the machine saying reasons for failure to build.

proc
build_part
(/datum/design/D, verbose)

Starts the build process for a given design datum.

Returns FALSE if the procedure fails. Returns TRUE when being_built is set. Uses materials.

D - Design datum to attempt to print.
verbose - Whether the machine should use say() procs. Set to FALSE to disable the machine saying reasons for failure to build.

proc
check_resources
(/datum/design/D)

Checks if the Exofab has enough resources to print a given item.

Returns FALSE if the design has no reagents used in its construction (?) or if there are insufficient resources. Returns TRUE if there are sufficient resources to print the item.

D - Design datum to calculate the modified resource cost of.

proc
combat_parts_allowed
(/mob/user)

Updates the various authorization checks used to determine if combat parts are available to the current user

proc
dispense_built_part
(/datum/design/D)

Dispenses a part to the tile infront of the Exosuit Fab.

Returns FALSE is the machine cannot dispense the part on the appropriate turf. Return TRUE if the part was successfully dispensed.

D - Design datum to attempt to dispense.

proc
eject_sheets
(eject_sheet, eject_amt)

Eject material sheets.

Returns the number of sheets successfully ejected. eject_sheet - Byond REF of the material to eject. eject_amt - Number of sheets to attempt to eject.

proc
get_construction_time_w_coeff
(construction_time, roundto)

Calculates the coefficient-modified build time of a design.

Returns coefficient-modified build time of a given design.

D - Design datum to calculate the modified build time of.
roundto - Rounding value for round() proc

proc
get_resource_cost_w_coeff
(/datum/design/D, /datum/material/resource, roundto)

Calculates the coefficient-modified resource cost of a single material component of a design's recipe.

Returns coefficient-modified resource cost for the given material component.

D - Design datum to pull the resource cost from.
resource - Material datum reference to the resource to calculate the cost of.
roundto - Rounding value for round() proc

proc
get_resources_w_coeff
(/datum/design/D)

Calculates resource/material costs for printing an item based on the machine's resource coefficient.

Returns a list of k,v resources with their amounts.

D - Design datum to calculate the modified resource cost of.

proc
head_or_silicon
(/mob/user)

made as a lazy check to allow silicons full access always

proc
list_queue
()

Generates a list of parts formatted for tgui based on the current build queue.

Returns a formatted list of lists containing formatted part information for every part in the build queue.

proc
on_finish_printing
()

Intended to be called when the exofab has stopped working and is no longer printing items.

Removes the overlay to show the fab working and sets idle power usage settings. Additionally resets the description and turns off queue processing.

proc
on_start_printing
()

Intended to be called when an item starts printing.

Adds the overlay to show the fab working and sets active power usage settings.

proc
output_available_resources
()

Generates a list of resources / materials available to this Exosuit Fab

Returns null if there is no material container available. List format is list(material_name = list(amount = ..., ref = ..., etc.))

proc
output_part_info
(/datum/design/D, categories)

Generates an info list for a given part.

Returns a list of part information.

D - Design datum to get information on.
categories - Boolean, whether or not to parse snowflake categories into the part information list.

proc
remove_from_queue
(index)

Removes datum design from the build queue based on index.

Returns TRUE if successful and FALSE if a design was not removed from the queue.

index - Index in the build queue of the element to remove.

proc
reset
(wire)

Picks limb to break. People with less limbs have a chance of it grapping at air

proc
shock
(/mob/user, prb)

Shock the passed in user

This checks we have power and that the passed in prob is passed, then generates some sparks and calls electrocute_mob on the user

Arguments:

user - the user to shock
prb - probability the shock happens

exosuit fabricator /obj/machinery/mecha_part_fabricator

Vars

Procs

Var Details

var authorization_override –

var being_built – /datum/design

var build_finish –

var build_materials – /list

var build_start –

var component_coeff –

var hacked –

var id_card – /obj/item/card/id

var link_on_init –

var part_sets – /list

var process_queue –

var queue – /list

var rmat – /datum/component/remote_materials

var seconds_electrified –

var stored_part – /obj/item

var stored_research – /datum/techweb

var time_coeff –

Proc Details

_try_interact(/mob/user)

proc add_part_set_to_queue(/list/part_list, /mob/user)

proc add_to_queue(/datum/design/D, /mob/user)

proc build_next_in_queue(verbose)

proc build_part(/datum/design/D, verbose)

proc check_resources(/datum/design/D)

proc combat_parts_allowed(/mob/user)

proc dispense_built_part(/datum/design/D)

proc eject_sheets(eject_sheet, eject_amt)

proc get_construction_time_w_coeff(construction_time, roundto)

proc get_resource_cost_w_coeff(/datum/design/D, /datum/material/resource, roundto)

proc get_resources_w_coeff(/datum/design/D)

proc head_or_silicon(/mob/user)

proc list_queue()

proc on_finish_printing()

proc on_start_printing()

proc output_available_resources()

proc output_part_info(/datum/design/D, categories)

proc remove_from_queue(index)

proc reset(wire)

proc shock(/mob/user, prb)